Newsletterarchive - PASS Stanztechnik AG

Newsletter December 2010

Innovations shown at the EuroBLECH 2010 are based on the day-to-day business of our customers. PASS Stanztechnik AG wanted to exhibit tools and punching operations to explore, move or adjust limits. Some of our tools shown at the EuroBLECH 2010 move to the limit starting with our development...

Newsletter November 2010

New in our PASS product range: PASS cassettes for tooling system SALVAGNINI

PASS Stanztechnik AG increased the range of products for the tooling system SALVAGNINI. Now you will find all versions of PASS tooling cassettes to type "SALVAGNINI S4".

Newsletter July 2010

PASS Coating Versions to reduce material build-up

H-PM^® tools are produced with steel made on powder-metallurgical base with a high degree of purity to fullfil the highest
punching demands.

Newsletter May 2010

Lifetime of tools / Regrind advices

Customers often ask: "We have 120.000 hits to punch in a stainless steel with sheet thickness of s = 3 mm. How many punches do we need?" or "At what quantity of hits should we regrind our tools?" Unfortunately the answers to all these questions are not easy to make as a lot of different factors...

Newsletter April 2010

Each tooling system is equipped with special design styles. So sometimes it can be difficult to disassemble and reassemble these special tooling designs. Therefore we have compiled a list of assembly instructions regarding tool positions P2 - P10 for the PASS SALVAGNINI tool systems.